Audio Guide
Phones and hearing aids: what the FCC's 100% compatibility rule requires from December 14, 2026
Our take
From December 14, 2026, every phone model a maker offers in the US must work with hearing aids by telecoil or Bluetooth as well as acoustically.
By Review Boon Team · · 5 min read
Key points
- From December 14, 2026, every phone model a manufacturer offers in the US must be hearing aid-compatible. Nationwide carriers follow on June 14, 2027, and other carriers on June 12, 2028.
- Every model must work with hearing aids in at least two ways: acoustic coupling plus a telecoil or Bluetooth link. At least 85% of a company's models need the telecoil link and at least 15% Bluetooth.
- Proprietary Bluetooth pairing counts until December 12, 2028. After that only non-proprietary technology counts; the FCC named Bluetooth LE Audio with the Hearing Access Profile as an example.
- New models must meet a volume control standard and ship with acoustic coupling and volume control switched on.
- Boxes and company websites must say whether a model has a telecoil or Bluetooth link. The website rules took effect on January 26, 2026.
From December 14, 2026, every phone model that a manufacturer offers in the United States has to be compatible with hearing aids. The date ends the manufacturers' transition under an order the Federal Communications Commission adopted on October 17, 2024 and published in the Federal Register on November 13, 2024. Until that date, at least 85% of each maker's models have to meet the standard. The rule counts cochlear implants as hearing aids.
The Commission said the order would let 48 million Americans with hearing loss choose among the same phone models as everyone else, instead of being limited in technologies, features and prices. It set different transition periods for manufacturers and carriers.
Who has to comply, and when
The rule applies to handsets, which it defines as devices with a built-in speaker that are typically held to the ear. In our reading, it sets requirements for phones, not for earbuds, headphones or hearing aids.
| Who or what | Before the date | From the date |
|---|---|---|
| Phone manufacturers | At least 85% of models compatible | December 14, 2026: all models |
| Nationwide carriers | At least 85% of models compatible | June 14, 2027: all models |
| Other carriers | At least 85% of models compatible | June 12, 2028: all models |
| Bluetooth link | From December 14, 2026: proprietary or open technology | December 12, 2028: open, non-proprietary technology only |
Once its transition ends, a company has to remove from its range every model that is not hearing aid-compatible, with no exceptions. From December 14, 2026, such a model can no longer obtain FCC equipment certification at all. The de minimis exception, which let companies offering only a limited number of models keep some that were not compatible, ends on the same three dates.
Two ways to connect on every model
The rule defines three ways a phone can work with a hearing aid. In acoustic coupling, the hearing aid's microphone picks up the phone's sound, and the phone has to meet limits on radio interference with the hearing aid. Telecoil coupling, also called inductive coupling, works through a telecoil in the hearing aid. Bluetooth coupling uses short-range wireless chips and antennas inside the phone.
After the transition, every model must support acoustic coupling and at least one of the other two. At least 85% of a company's models must meet the telecoil requirements, and at least 15% must have Bluetooth coupling, either in place of a telecoil or alongside one. In our reading, nothing in the rule requires Bluetooth hearing aid pairing on every model: 15% of the range is the floor.
Bluetooth: any technology until 2028, then an open one
Until December 12, 2028, makers may meet the Bluetooth share with their own proprietary technology. From that date only a standalone, non-proprietary implementation counts. It must be qualified through testing, and it must offer full interoperability between hearing aids and phones across networks, carriers, platforms and phone makers. The Commission gave Bluetooth LE Audio and the related Hearing Access Profile as examples of standards that could meet this, and said the approach would bring more universal connectivity between phones and hearing aids, including over-the-counter ones, and help address phones that pair only with certain hearing aids.
Since January 26, 2026, manufacturers have also had to name, in a sworn declaration with each certification application, the Bluetooth standard a model uses, and confirm it was tested against that standard. Our guide to LE Audio and Auracast explains how those standards appear on a spec sheet, and our guide to earbud hearing aid software covers the FDA's over-the-counter hearing aid category.
Volume control, switched on out of the box
Every new model a company adds after its transition must also meet the rule's volume control requirements, which it defines by the ANSI/TIA-5050-2018 standard. The Commission said this benefits everyone with hearing loss, not only people who wear hearing aids. Models submitted for certification from December 14, 2026 must come out of the box with acoustic coupling and volume control turned on. The telecoil or Bluetooth link can sit in a secondary setting, but every setting must be clearly labeled and easy to find.
Software updates may not take away a model's hearing aid certification, and they may not lower its conversational gain, a figure the box has to show, except by a de minimis amount. Before an update adds frequency bands or operations that the certification does not cover, users must be told.
What the box and the website must say
The outside of the box must say that the model is hearing aid-compatible, whether it meets the telecoil or Bluetooth requirements or both, and which Bluetooth technology it uses. For a model certified under a standard with volume control requirements, the box must also give its conversational gain with and without hearing aids. Instructions for the settings can come as a printed insert or manual, or online, through a QR code and a web address given to the buyer.
The website rules took effect on January 26, 2026, once the Office of Management and Budget had approved the rule's paperwork requirements on May 7, 2025. A company with a public website must list each model it offers with its FCC ID and the standard it was certified under. For each model, the list must say whether it meets the telecoil requirements, which Bluetooth technology it has, and, for models certified under the 2019 standard, its conversational gain. Companies must also name a department that can answer hearing aid questions, give an email address, a mailing address, a text number and a toll-free number, update the pages within 30 days of a change, date-stamp them and link to the FCC's wireless hearing aid compatibility page. The eCFR's record lists January 26, 2026 as the section's latest amendment.
Older phones and trying one in a store
Phones certified under older versions of the standard can stay on sale. A model certified before December 13, 2024 may still be offered for as long as the Commission allows, and models certified under the 2011 standard or earlier still count as compatible if they were on sale before the company's transition date. The Commission said it chose gradual replacement because older compatible models tend to be cheaper.
The rule also requires manufacturers and carriers to make their best efforts to let shoppers try compatible models in the stores they own or operate. If a model is not in a store, they must make their best efforts to ship it to the store or the shopper's home for testing within 48 hours.
Sources
- Achieving 100% Wireless Handset Model Hearing Aid Compatibility, final rule (FCC 24-112), 89 FR 89832 Federal Communications Commission, Federal Register (GovInfo), November 13, 2024
- Achieving 100% Wireless Handset Model Hearing Aid Compatibility, announcement of effective date and correction, 91 FR 3070 Federal Communications Commission, Federal Register (GovInfo), January 26, 2026
- eCFR version record for 47 CFR 20.19 (latest amendment January 26, 2026) Office of the Federal Register (eCFR versioner API), November 16, 2026
Researched and drafted with AI assistance, then checked against the 3 sources above in a separate fact-check on November 16, 2026. Spotted an error? Tell us.