Audio Guide
Wireless microphones: where the FCC lets them transmit without a license, and who can get one
Our take
Since July 13, 2020, only microphones certified under the FCC's Part 15 rules may be used unlicensed. The bands, power limits and who may hold a license.
By Review Boon Team · · 5 min read
Key points
- Unlicensed wireless microphones may use broadcast TV channels not taken by nearby stations, plus two narrow slices of the 600 MHz band, under the FCC's Part 15 rules.
- Power is capped at 50 milliwatts in the TV bands and 20 milliwatts in the 600 MHz guard band and duplex gap; wider multichannel systems may use 100 milliwatts in the TV bands.
- Since July 13, 2020, only microphones certified for unlicensed operation under Part 15 may be used without a license.
- FCC licenses are limited to broadcasters, networks, some cable operators, film and TV producers, certain Broadband Radio Service licensees, large venues and professional sound companies.
- A 2024 FCC order, in force since November 18, 2024, added wireless multichannel audio systems and kept the old transition dates; a 2026 FCC rule later removed the 600 MHz disclosure requirement.
The Federal Communications Commission licenses wireless microphones only for a short list of professional users. Everyone else may use one under its Part 15 rules, without a license, within limits on where a microphone may transmit and how strongly, set out in 47 CFR 15.236. Since July 13, 2020, the rules say, only wireless microphones certified for operation under Part 15 may be operated under it.
The FCC last revised the operating rules in 15.236 in a 2024 order, effective November 18, 2024, which made room for a newer kind of digital system and updated the rules to reflect the end of the transition that followed the agency's 600 MHz incentive auction. It chose at the time to keep the old transition dates in its rules, noting that some people may still have microphones “that can no longer be used because they operate on frequencies where operation is now prohibited.” This guide sets out what the rule text says now; it does not assess any microphone.
Where unlicensed microphones may operate
| Where | Frequencies | Power limit |
|---|---|---|
| Broadcast TV channels 2-36 (not channel 37) | 54-72, 76-88, 174-216 and 470-608 MHz | 50 mW; 100 mW for multichannel systems wider than 1 MHz |
| Part of the 600 MHz guard band | 614-616 MHz | 20 mW |
| Part of the 600 MHz duplex gap | 657-663 MHz | 20 mW |
The TV bands come with a condition. A microphone may only operate at least four kilometers outside the protected service contour of a co-channel TV station, that is, a station on the same channel. In our reading, that leaves an unlicensed user only the TV channels that no nearby station broadcasts on, and which ones those are differs from place to place. Channel 37, at 608-614 MHz, is reserved for radio astronomy and is not on the list.
Ordinary narrowband microphones may use channels of up to 200 kHz, placed in 25 kHz steps. The rules also say what does not count: auditory assistance devices, which Part 15 defines separately, are not wireless microphones under this section. The FCC noted in 2024 that the UHF-TV band has long been used by wireless microphones, citing reasons such as good signal propagation and compact device size.
What happened to the 600 MHz band
The 600 MHz guard band and duplex gap are buffers. The guard band, at 614-617 MHz, protects channel 37 from licensed 600 MHz services, and the 11-megahertz duplex gap at 652-663 MHz separates those services' uplink and downlink frequencies. The rest of the 600 MHz band, which the rules call the 600 MHz service band, is no longer open to unlicensed microphones.
The FCC phased that change in over several years, in transition provisions set out in 47 CFR 15.37. From July 13, 2017, anyone who made, sold or leased unlicensed microphones capable of operating in the 600 MHz service band had to display a consumer disclosure where they were sold, in catalogs and on websites. Microphones for which certification was sought from December 26, 2017 had to meet the new rules, and the manufacture and marketing of microphones that did not had to end by September 24, 2018. The FCC said in 2024 that keeping these provisions would help parties “more easily determine which wireless microphones comply with the current rules,” including which frequencies they may use. A direct final rule the FCC published in January 2026, in a review of rules it called facially obsolete, removed the disclosure requirement from 15.37 as of March 27, 2026. It left in place the paragraph with the December 2017, September 2018 and July 2020 deadlines.
Who can get a license
Licensed microphones fall under Part 74 of the rules as low power auxiliary stations, and the list of who may hold such a license is short. Under 47 CFR 74.832 it covers AM, FM, TV, international and low power TV broadcast licensees; broadcast networks; cable operators that produce their own programming; motion picture and TV program producers; certain Broadband Radio Service licensees and leaseholders; large venue owners or operators; and professional sound companies.
Venues and sound companies must sign a certification that the applicant “routinely uses 50 or more low power auxiliary station devices, where the use of such devices is an integral part of major events or productions.” A license for a large venue covers that venue only. Licensees get more room than unlicensed users. Besides the TV bands, producers, cable operators, venues and sound companies may be authorized in the 653-657 MHz part of the duplex gap, in several bands between 941.5 and 959.85 MHz, at 1435-1525 MHz and in two 6 GHz segments, 6875-6900 and 7100-7125 MHz; the bands open to broadcasters are listed in a separate section. Under the FCC's rules, licensed users are required to coordinate among themselves to avoid interfering with one another.
What the 2024 order changed
The order, adopted on February 15, 2024, allowed wireless multichannel audio systems, or WMAS, which the rules define as systems “using broadband digital transmission techniques for microphone and in-ear monitor system applications and other multichannel audio use.” The FCC said such systems use wider channels and a more efficient protocol, which can let more microphones work in the same amount of spectrum.
WMAS may now operate with a license in most of the bands open to licensed microphones, and without one in the TV bands and the 657-663 MHz part of the duplex gap. They are not allowed unlicensed in the 6 GHz segments, which only Part 74 licensees may use for wireless microphones. The order also updated the European technical standard the rules rely on to its 2021 version, and dropped a requirement for unlicensed microphones in the guard bands to check a database, since those bands are now unavailable to licensed services nationwide, it said.
The FCC's stated aim was to increase wireless microphone spectral efficiency. Commenters disagreed on how far to go. ViacomCBS asked the FCC to keep WMAS out of the UHF-TV band or make it secondary to narrowband microphones, and it and Lectrosonics wanted WMAS limited to licensed users; Microsoft opposed unlicensed WMAS in the TV bands because of the possible effect on white space devices. The FCC cited Shure's point that many professional users are not eligible for a license because they do not use 50 or more microphones, and allowed unlicensed use, finding that the wider channels mean lower power density and a short range at which interference could occur.
This guide is based on the FCC's 2024 order and its January 2026 direct final rule as published in the Federal Register, and on the rule text in the Code of Federal Regulations (revised as of October 1, 2025), all read on November 20, 2026. The rules contain further technical conditions not listed here. It does not assess any microphone.
Sources
- Wireless Microphones in the TV Bands, 600 MHz Guard Band, 600 MHz Duplex Gap and other bands, final rule (ET Docket No. 21-115; FCC 24-22) Federal Communications Commission, Federal Register (govinfo), October 18, 2024
- Delete, Delete, Delete, direct final rule (ET Docket No. 25-133; FCC 25-85) Federal Communications Commission, Federal Register (govinfo), January 26, 2026
- 47 CFR 15.37, Transition provisions for compliance with this part (revised as of October 1, 2025) Federal Communications Commission, via the U.S. Government Publishing Office (govinfo), October 1, 2025
- 47 CFR 74.832, Licensing requirements and procedures (low power auxiliary stations; revised as of October 1, 2025) Federal Communications Commission, via the U.S. Government Publishing Office (govinfo), October 1, 2025
- 47 CFR 73.603, Numerical designation of television channels (revised as of October 1, 2025) Federal Communications Commission, via the U.S. Government Publishing Office (govinfo), October 1, 2025
Researched and drafted with AI assistance, then checked against the 5 sources above in a separate fact-check on November 20, 2026. Spotted an error? Tell us.