Review Boon

Home and tech products, reviewed

Buying Guides Guide

How Reese's Law governs coin batteries in remotes and smart home gadgets

Our take

Products that run on button or coin cells must lock the battery away and carry warnings. What the CPSC rule requires, what recalls show and what may change.

By Review Boon Team · · 5 min read

Key points

  • Products made or imported after October 23, 2023 that use button or coin batteries must meet 16 CFR part 1263; the CPSC's enforcement grace period ended on March 19, 2024.
  • A replaceable battery must sit behind a cover that needs a tool, with captive screws, or two independent and simultaneous hand movements to open.
  • Warnings must appear on the packaging, in the instructions and, where practicable, on the product itself.
  • Of 64 CPSC recalls since September 2024 with "Battery Ingestion" in the title, 28 cite the standard for consumer products with button or coin batteries, by our count.
  • UL told the CPSC in August 2026 that it had published a revised standard, UL 4200A-2026. Unless the CPSC rejects it, it becomes mandatory 180 days after UL's notification, or on a later date the CPSC sets.

Remote controls, garage door openers and battery-powered sensors can run on button or coin cells, small round batteries that, the CPSC warns, can cause serious injuries, internal chemical burns and death if swallowed. Since 2023, a federal rule has set how products that use them must hold the battery and warn about it. It comes from Reese's Law, which Congress passed to protect children six years old and younger from swallowing the batteries, and it is codified by the Consumer Product Safety Commission as 16 CFR part 1263. The law and the rule also set requirements for the packs the batteries themselves are sold in.

Which products and batteries it covers

The law defines a button cell or coin battery as a single-cell battery whose diameter is greater than its height, or any other battery the Commission finds poses an ingestion hazard. A product is covered if it contains or is designed to use one, whether or not the battery is meant to be replaced, and whether it comes in the box or is sold separately. The rule excepts zinc-air batteries as cells that do not pose the hazard.

Toys are handled separately. The law exempts toy products that meet the battery requirements of the mandatory toy standard in 16 CFR part 1250. Children's products that are not toys, such as light-up shoes, are covered by part 1263 and must be tested by a CPSC-accepted third-party laboratory.

The rule applies to products made or imported after October 23, 2023. The Commission gave manufacturers a 180-day period of enforcement discretion, from September 21, 2023 to March 19, 2024, because testing capacity was limited. Every covered product has to be certified as compliant.

How the battery has to be held

Part 1263 makes the UL 4200A-2023 standard mandatory, with the Commission's own additions. For a replaceable battery, the compartment must either need a coin, screwdriver or other tool to open, with screws that stay attached to the cover when loosened, or need at least two independent and simultaneous hand movements that cannot be combined into one movement of a single finger. A battery that is not meant to be replaced must be enclosed so it cannot be reached, or held by soldering, rivets or similar means and stay in place when pulled with a test hook.

In its notice, the Commission described designs already on the market: remote controls use either screwed covers or covers that slide out of the base, which typically need two simultaneous actions, and many garage door openers need a tool. It gave a television remote control as its example of a handheld product, one designed to be carried easily, weighing up to 4.5 kg (10 lb) and likely to be used or misused while held.

Tests for replaceable-battery compartments in UL 4200A-2023, as the CPSC summarized them (88 FR 65274). The battery must not become accessible or come loose.
TestWhat it involves
PreconditioningPlastic parts kept 7 hours at 158°F or more; cover opened and battery replaced 10 times
Drop10 drops for handheld products, 3 for portable ones, each from 1 m (39.4 in) onto hardwood
Impact3 impacts on the compartment with a steel sphere, at 2 J (1.5 ft-lbf)
Crush330 N (74.2 lbf) for 10 seconds over a flat plate
Compression, torque, tensionTests from the toy standard, at no less than 136 N, 0.50 Nm and 72.0 N
AccessibilityA test probe pressed with 50 to 60 N must not touch the battery

Warnings on the product, the box and the manual

The law requires warnings on the product's packaging, in its instructions and, where practicable, on the product itself, placed so they can be seen when the battery is fitted or replaced. They must identify the ingestion hazard and tell people, as practicable, to keep new and used batteries away from children, to seek immediate medical attention if a battery is swallowed, and to follow other consensus medical advice. Under UL 4200A-2023, manuals must also say to always secure the battery compartment completely and, if it does not close securely, to stop using the product, remove the batteries and keep it away from children.

Packs of the batteries themselves have needed child-resistant packaging since February 12, 2023, a requirement the law set directly. Battery packaging made or imported after September 21, 2024 must also carry an English warning label on its main display panel. If the full label does not fit there, an icon at least 20 mm across goes on that panel and the text on a secondary one. The packaging must also tell buyers to keep the batteries in the original package until use, to dispose of used ones immediately away from children, and not to put them in household trash.

What CPSC recalls show

The CPSC's recall database lists 64 recalls with "Battery Ingestion" in the title announced from September 12, 2024 to November 12, 2026. By our count of the titles, 29 cite the mandatory toy standard, 28 the standard for consumer products with button or coin batteries, and 9 the child-resistant packaging requirement. Four cite two of these, one says only that it violates multiple standards, and one names none. In our reading, light-up novelties, LED lights and toys dominate the list. No title names a TV remote, a kitchen scale or a smart speaker. Three recalls are close to this site's categories:

  • Pella, February 6, 2025: about 340 sliding patio doors and windows with automated shades. The CPSC said the doors' sensor panel and the windows' Insynctive remote control had button cells children could easily reach, and lacked the required warnings. No injuries were reported.
  • Coin battery chargers sold with rechargeable 2032 cells: about 1,100 CT-ENERGY chargers (August 28, 2025) and about 4,930 EEMB chargers recalled by A2batt (August 6, 2026). In both, the CPSC said children could easily reach the batteries, which also lacked child-resistant packaging and the required warnings.

Each CPSC recall record names the remedy and the company to contact. Our guide to checking kitchen appliance recalls explains how to look a model up.

A revised standard is under review

UL notified the Commission in August 2026 that it had approved and published a revised standard, UL 4200A-2026. On September 3, 2026, the Commission asked for comments by September 17 on whether the revision improves safety. Under Reese's Law, the Commission has 90 days from the notification to reject a revision in whole or in part. Otherwise the revised standard becomes mandatory 180 days after the notification, or on a later date the Commission sets. A Federal Register search on November 16, 2026 found no later CPSC document deciding on the revision.

The Federal Register notice gives the notification date only as "August XX, 2026", so the exact deadlines cannot be read from it. By our arithmetic, any date in August puts the 90-day mark between late October and late November 2026, and the 180-day mark between late January and late February 2027.

Sources

  1. Safety Standard for Button Cell or Coin Batteries and Consumer Products Containing Such Batteries, direct final rule, 88 FR 65274 Consumer Product Safety Commission, Federal Register (GovInfo), September 21, 2023
  2. Safety Standard for Button Cell or Coin Batteries and Consumer Products Containing Such Batteries, final rule on battery packaging labels, 88 FR 65296 Consumer Product Safety Commission, Federal Register (GovInfo), September 21, 2023
  3. Notice of Availability and Request for Comment: Revision to the Voluntary Standard for Products Containing Button Cell or Coin Batteries, 91 FR 56604 Consumer Product Safety Commission, Federal Register (GovInfo), September 3, 2026
  4. CPSC Recalls API: recalls since March 20, 2024 with "Battery Ingestion" in the title (64 records) U.S. Consumer Product Safety Commission (SaferProducts.gov), November 16, 2026

Researched and drafted with AI assistance, then checked against the 4 sources above in a separate fact-check on November 16, 2026. Spotted an error? Tell us.