Review Boon

Home and tech products, reviewed

Smart Home Guide

Smart bulbs and the federal light bulb rules: what DOE's 2028 standard requires, and which bulbs it exempts

Our take

Bulbs made from July 25, 2028 face much higher efficiency minimums. Smart bulbs get a lower bar, and some color and tunable ones are exempt. What the rule says.

By Review Boon Team · · 4 min read

Key points

  • Since July 25, 2022, general service bulbs sold in the US have had to reach 45 lumens per watt, a level incandescent and halogen bulbs cannot meet.
  • Bulbs made from July 25, 2028 must meet minimums that rise with light output. By our calculation, an 800-lumen A-line bulb needs about 124 lumens per watt, or about 116 if it is a smart bulb with standby mode.
  • Some color-changing and tunable-white bulbs, and smart bulbs with built-in extras such as speakers, are exempt from the 2028 minimums when sold "in packages of two lamps or less".
  • DOE combined standby and active energy in one measure instead of capping standby power at 0.2 watts, as California's energy commission had urged.
  • The Code of Federal Regulations revised as of January 1, 2026 carries the 2028 standard unchanged.

Since July 25, 2022, it has been illegal to sell a general service light bulb in the United States that produces less than 45 lumens of light per watt, a minimum that incandescent and halogen bulbs cannot meet. The next step comes on July 25, 2028. Bulbs made from that date must meet far higher minimums, under a Department of Energy rule published on April 19, 2024. The rule treats smart bulbs, which DOE describes as integrated lamps with standby functionality, separately, and exempts some of them.

What changes in 2028

The flat 45 lumens per watt gives way to formulas in which the required efficacy rises with a bulb's light output. There are separate formulas for integrated and non-integrated lamps, for omnidirectional and directional (reflector) lamps, for short and long ones, and for lamps with and without standby mode. Integrated LED lamps must also have a power factor of at least 0.7.

The Code of Federal Regulations revised as of January 1, 2026 carries the 2028 standard, the standby classes and the exemptions as published in 2024. The eCFR's record shows the standards section was last amended on May 20, 2025, and a Federal Register search on November 16, 2026 found no Department of Energy document on general service lamps after February 2025.

In DOE's analysis, A-line bulbs and other shapes such as candelabra lamps fall into the integrated omnidirectional short class. Applying that class's two formulas gives these minimums:

Minimum efficacy for integrated omnidirectional short lamps made from July 25, 2028, in lumens per watt. Our calculation from the formulas in 10 CFR 430.32(dd)(1)(iv); the maximum wattage is our arithmetic.
Light outputWithout standby modeWith standby mode (smart bulbs)Since 2022, all bulbs
450 lumens108.6 (up to 4.1 W)99.8 (up to 4.5 W)45 (up to 10.0 W)
800 lumens124.3 (up to 6.4 W)115.5 (up to 6.9 W)45 (up to 17.8 W)
1,100 lumens127.5 (up to 8.6 W)118.7 (up to 9.3 W)45 (up to 24.4 W)
1,600 lumens128.3 (up to 12.5 W)119.5 (up to 13.4 W)45 (up to 35.6 W)

The 2028 standard applies by manufacture date, so in our reading, bulbs made before July 25, 2028 that meet the 45-lumens-per-watt minimum can still be sold after it.

A lower bar for smart bulbs

Standby mode, in the statutory definition the rule uses, is the state in which a product is connected to mains power and offers certain user-oriented or protective functions. For lamps capable of it, the rule sets lower minimums. In the integrated omnidirectional short class, the formula ends in 17.1 instead of 25.9, so by our arithmetic the minimum is 8.8 lumens per watt lower at every light output.

The California Energy Commission asked DOE for a separate cap of 0.2 watts on standby power, in line with California's own standards. The commission said more than 700 connected lamp models in its database already met that limit. DOE instead kept a single measure that combines active and standby energy, so a bulb with higher standby power can still comply if its light source is more efficient. It set the standby classes using 0.5 watts, a level it found the vast majority of bulbs met, calling that a conservative choice for a developing market. In its estimates of energy use, it assumed 0.2 watts per smart bulb.

Which bulbs are exempt

The 2028 minimums do not apply to five kinds of lamp. Four of them are exempt only when sold "in packages of two lamps or less", as the rule puts it:

  • lamps designed and marketed with at least one setting that lets the user change the correlated color temperature, and no setting in which they meet the definition of a colored lamp
  • lamps designed and marketed with at least one setting in which they meet the definition of a colored lamp and at least one other setting in which they do not
  • lamps that can operate in standby mode and are designed and marketed with one or more built-in components offering a completely different function, such as a speaker, a camera or an air purifier, that do not affect the light output
  • non-integrated lamps that can operate in standby mode
  • general service OLED lamps, in any package size

DOE said it did not have enough information on how these lamps perform, in a rapidly evolving market, to set standards for them now, and that it may consider them in a future rulemaking. They remain subject to the 45-lumens-per-watt minimum. Lamps with motion sensors that control the light, internal battery backup for the light, or dusk-to-dawn operation are not exempt. In our reading of the package condition, a four-pack of color-changing smart bulbs would have to meet the 2028 minimum, while the same bulbs sold singly or in pairs would not.

DOE's estimates

DOE assumed that smart lamps, which it treated as limited to homes, would reach 50 percent market penetration in the residential sector by the end of its analysis period. It estimated that the standard's total benefit to consumers, future savings on running costs minus higher purchase prices for bulbs bought from 2029 to 2058, would have a net present value of $8.5 billion to $22.2 billion, depending on the discount rate used (7% or 3%). These are DOE's projections, made in 2024.

Sources

  1. Energy Conservation Program: Energy Conservation Standards for General Service Lamps, final rule, 89 FR 28856 U.S. Department of Energy, Federal Register (GovInfo), April 19, 2024
  2. 10 CFR 430.32, Energy and water conservation standards and their compliance dates (Code of Federal Regulations, revised as of January 1, 2026) Office of the Federal Register and GPO (GovInfo), January 1, 2026
  3. eCFR version record for 10 CFR 430.32 (latest amendment May 20, 2025) Office of the Federal Register (eCFR versioner API), November 16, 2026

Researched and drafted with AI assistance, then checked against the 3 sources above in a separate fact-check on November 16, 2026. Spotted an error? Tell us.